7 Pages are shown on the Main Page.

7 pages are shown on the Main Page. To see additional posts, click on the link "Older Posts" at the bottom of the main page. For videos go to https://www.youtube.com/@normanretzke4377/videos click "skip" to avoid ads


G has a "swell" time kayaking

G has a "swell" time kayaking
G has a "swell" time on Lake Michigan in an inflatable canoe

Dawn on the Gulf of Mexico

Dawn on the Gulf of Mexico
Dawn on the Gulf of Mexico

Warren Dunes Sunset

Warren Dunes Sunset
Warren Dunes Sunset
Showing posts with label Electric Door Lock Issue. Show all posts
Showing posts with label Electric Door Lock Issue. Show all posts

Tuesday, July 6, 2021

Side Door Electric Lock Issue

 

Using 3M Scotch-Brite Rough Pad to scour electrical contacts (photo after cleaning)


Bookmark and Share

The side door electric lock stopped working with the Chevy fob.  It became intermittent.

This was an easy thing to fix.  There are two, spring loaded contacts on the door and these align with two copper pads on the inside of the door frame.  When the door is closed, these contacts should align and the spring pressure should be sufficient to pass electric current to the door lock solenoid. 

I concluded that wasn't happening.  I inspected the contacts, which were no longer bright brass and the plates were slightly pitted where physical contact is made. I concluded that minor oxidation was creating sufficient electrical resistance to prevent adequate power from reaching the door lock solenoid.

In the old days, I would have used very fine sandpaper to remove the oxidation. 

Scotch-Brite is Superior

I decided instead to use a dry sponge which had "Scotch-Brite"  green scouring pad on one side (trademark of 3M company). I usually have a few of these as well as the blue sponge/pads for dishes.  However, for this chore a rougher pad than the blue was necessary. So I took an old green one and used it dry to buff the contacts.  About 30 seconds of rubbing was sufficient to brighten them up.

For industrial applications, a silver contact would be preferred, but for an automobile brass is the choice of the manufacturer.


Buffing the door contact plates

Buffing the door mounted, spring-loaded contact surfaces


After wiping the contact surfaces with a clean rag, the electric door lock worked as designed.


Original Material: Roadtrek210.blogspot.com (c) 2021