With cool and cold weather trekking in mind we've added some additional sources of heat to our rigs. This has worked well for us. Our 210P includes a heat pump and a propane furnace. These work very well, but we wanted to add things to work below the 40F lower limit of the heat pump and supplement the propane furnace. We do conserve propane.
Here's the stuff to supplement the built in heat:
- Ceramic hot air heater 750/1500 watt, electric.
- Circulating fan, 12V.
- Electric blanket, dual control.
- Electric wall mount heater, 250 watt and Digital Thermostat (evaluated)
- Floor heat - considered but not installed
The Ceramic heater. Has a built in non-digital thermostat. Works well in the small space of the Roadtrek and we also use this to load the Onan generator in cool weather for the monthly 2-hour run. There is also a version available with a rotating, motorized base. That's the one we have, but we usually point it in one direction.
Circulating fan, 12V. This doesn't add heat, but it does help to mix the air in the Roadtrek. Generally the very front of the RV is cooler than the rear because of that large expanse of windshield glass. We do cover the windows with Reflectix. The fan fits well in the tray above the side entry door. It has side air inlets.
Electric Blanket. We purchases a king size "plush" dual control with 10 heat settings (including prewarm and low). G loves it. Got ours at Sam's Club on a special price. We like the illuminated settings, makes it easy to find the controllers in the dark. Ours is a beige Homes Sunbeam, similar to the photo.
 |
| Holmes Sunbeam dual control King blanket |
Electric wall mount heater with digital thermostat. This was evaluated last year in our larger rig. The bedroom in the 5th wheel is about the same volume as the Roadtrek. I suspended a 400 watt radiant panel in the bedroom last winter and controlled it via a digital thermostat. It actually provided too much heat. I was also concerned by the high surface temperature. I have since found a similar unit which uses about half the power and therefore puts out less heat. It is a 250 watt unit. That seems about right for the Roadtrek
We used the 250 watt in our 3rd rig this spring. Works very well and with lower surface temperature.
I'm thinking of suspending (hanging) it in the front of the Roadtrek at night. Because it radiates heat both front and rear, that should dramatically improve the front temperature. At 250 watts, it is 1/3 the heat output of the ceramic heater, and would reduce energy requirements. I'd stage these so the panel thermostat comes on first. If the interior temperature of the Roadtrek continues to fall, then the ceramic 750 watt heater would come on (low setting). If even lower, the propane furnace would run.
Floor Heat Pad. This is something I've considered, but not yet done. We currently have a heavy duty carpet on the floor of the RT, which is about 78 inches long x 34 inches wide. This covers the entire galley floor area. One option is to add a foot warmer. Cozy products has a 135 watt electric floor mat. It is about 17 x 38 inches.
 |
Cozy Products FWB Super Foot Warmer |
So there are our current approaches and a floor heat possibility we are considering.
Hope you have pleasant cool and cold weather trekking experiences. My next post will look more closely at comfort factors for cool and cold weather trekking.
