7 Pages are shown on the Main Page.

7 pages are shown on the Main Page. To see additional posts, click on the link "Older Posts" at the bottom of the main page. For videos go to https://www.youtube.com/@normanretzke4377/videos click "skip" to avoid ads


G has a "swell" time kayaking

G has a "swell" time kayaking
G has a "swell" time on Lake Michigan in an inflatable canoe

Dawn on the Gulf of Mexico

Dawn on the Gulf of Mexico
Dawn on the Gulf of Mexico

Warren Dunes Sunset

Warren Dunes Sunset
Warren Dunes Sunset

Tuesday, October 10, 2017

Fall, Monarchs and Nature



Bookmark and Share



We're currently on the eastern shore of Lake Michigan. The great annual Monarch butterfly migration continues. We enjoy watching the flutter by as we walk the shoreline. Some get perilously close to the water. Nature prevails. As I write this a nuthatch is working its way down the pine, about 5 feet away. With fall, there is some urgency as temperatures cool.








Some Monarchs don't make it


Tuesday, October 3, 2017

Working, Volunteering, Planning and Trekking


Bookmark and Share



This post is a summary of how I/we got to this point in our trekking. In our case it took years. Others might get to this point more rapidly and this post might be an aid in accomplishing that.  Later in the post there is some planning information.

Early Travels
For a good part of my life I decided to take "The Road Less Travelled" (Note 1). Since 2013 we've trekked 29,000 miles while working.  Prior to that I have driven all over the U.S. and parts of Canada. About 600,000 miles total, and hundreds of airline trips with destinations ending in cities, towns and villages. A lot of the driving was local, but an awful lot was long distance for business purposes. I've had mid- to long-term business stays in CA, NY, OK, IA, IN, MO, IL, AL, GA, LA, FL, MI, CT, UT, TX, PA, MD, OH, WY, WI, NE, SC and elsewhere, while driving or flying in between.  There were also business trips outside the U.S. and a few non-business, too.  I would work during the day and drive in the evening or at night.  I slept in the back of a car, in a truck or wherever. Froze at more than one rest stop.  I lived weeks and months in a variety of motels. Work was frequently 12-18 hour days, and frequently 6 or 7 days a week. At one time I got through this by saying "I'll sleep tomorrow".

No matter where I was, I always maintained a "home base" somewhere, so I had a place to hang my hat, a place I could call "home".  Sometimes there was family waiting for me, and sometimes not. While travelling I paid attention to the communities I was in. Not much sight seeing was possible, but I did visit State Parks, etc. when I could. I checked out the local places, diners, museums, etc. I got to know the locals, as we worked together.

In 2000 I began serious investigation into places in the U.S. I might like to live. My many business travels were very useful to me. There were observations made while on a lot of automobile and airline trips, mostly for business purposes. Then as of 2013 via RV to get a closer and longer look at the top choices from my list.

Home Bases
We used all of our travels after 2000 to investigate locations we would be interested in living for longer periods of time. We used our treks after 2013 to set up several "home bases" in the U.S. which will provide me and G with the life we want to live in retirement. I also used them to get to client locations, as well as do exploring for where we would like to live for the next 10 years. We have friends and family scattered from the Northwest to the Northeast, the Southeast and the Southwest. There is also a very large group in the midwest.  Trekking is a good way to visit. But that is not guaranteed. For example, in the spring of 2017 we headed from the Southwest to Florida to visit family and friends. That was a 2,000 mile trek, and we had arranged to stay in a campground in FL. This had been pre-arranged but on arrival the family in FL cancelled our visit. After a couple of days of hovering and enjoying the area, we trekked on to the Florida Keys and visited some wonderful friends.

Obviously, being flexible is helpful for a trekker.

Planning my "escape"
I began planning my "escape" from a life of work at the age of 55. At the time and I had some serious obligations, such as young adult children who were in their early 20s at the time. That meant I was dealing with the financial consequences of their college educations. All obtained their degrees at "out of state" schools, and one attended a private college. The costs were not trivial and they shared in the burden. With freedom to choose comes responsibility and obligations. 

So I first had to deal with my financial obligations.  

Another issue was my civic duty. "What's that?" you may ask. I've been a volunteer of one sort or another over the span of about 25 years. Currently, one of our home bases is a condominium.  I am a HOA unit owner, and these associations run with a board, which makes all of the critical decisions. I've been on such a board for 7 years. Not a hobby, I assure you. That association is 40 years old and spends about $1.3 million each year. 75% of that is on "maintenance". I have "worked" as a volunteer for up to 700 hours in a single year doing this (that was 2010-2011).

I used the period from 2001 to the present to develop a plan. Patience, I have been told, is a virtue.

Creating a portal to another world
If we choose to trek we'll need something to accomplish that in. In my experience, successful trekking requires a significant amount of planning and preparation. I've done a lot of backpacking and ground camping over the years, and so I approached trekking in a RV the same way.  We decided we wanted to be nearly "full time trekkers" and that upped the stakes a bit.

To go "full time" or "much of the time" requires a lot of logistics. One can travel continuously, or one can hop from one geographical area to another.  We chose to hop, and do a lot of exploring in between. That decision required that we determine what "base" areas we wanted to live in.

As I had never been in a RV but at a show, I had absolutely no practical experience. But then, I learned to camp as an adult and so I approached this as merely another learning exercise.

Establishing the Location of a Base or Bases
With a map, we drew a series of circles with 400 mile radiuses. The centers were locations we might choose to base or live for longer periods. These were chosen with several criteria:

  • Proximity to things we wanted to see or spend time visiting (400 miles distance max).
  • Weather. Moderate temperatures in winter or fall or summer (multiple base locations required).
  • Resources. Water is a necessity. 
  • Reasonable costs and stable communities in viable states. (Not CA, IL, or other financially strapped states or areas; avoid financial time bombs). 
  • Nice people. Rather a broad category, but in some areas we have found that attending even a diner can be a wonderful experience, while at others it isn't. Sometimes the staff would prefer to be elsewhere and makes it obvious. In fact, going to such places is a wonderful way to determine the mindset of the locals. Anywhere that doesn't want us is a place I choose not to be. 
Steps for Success
We decided we'd need to formulate a series of steps. Money is the grease or fuel for living, but it isn't the goal. We decided we really needed to focus on finances while developing our plan. Here is what we did, and it worked for us so it might work for others. So what are the steps?
  • Step 1
Develop a long term plan. If you think I'm a "just wing it" person, or that you can simply "wing it", then brace yourself for some real upsets. "Retiring early" or full time trekking may allow you to escape from today's "daily grind." But it won't solve the problems you will face 2, 5, 10 or further years into the future. 

IMHO retiring early requires some real planning, or perhaps winning the lottery.   I concluded that I could not retire early, and did not.
  • Step 2
Begin a budget, NOW. The longer you keep one the more you will know about your spending habits and what it actually takes to live. If you can, purchase Quicken and plug in all of your expenses, itemizing credit card expenses, debt (auto, credit card and mortgage). Track your current living expenses and develop a budget. You will also need one while trekking, so you might want to know how you are doing today and compare that to the future "plan".
  • Step 3
Consider a plan that will allow you to live "debt free". Using your budget information, determine how many months or years it will take to achieve this. Then use that time to develop your plan and to prepare for it.
  • Step 4
Live a life in balance. Consider living a life in moderation. That means balancing today's needs, wants and desires with those future expectations. Save rather than buy the toys. Drive that automobile a few years longer, etc.
  • Step 5
Focus on health. One's health is an important criteria. A healthy lifestyle is helpful. However, as we age we may find we lose abilities and our health will decline. We decided we'd have to do whatever it was we were interested in prior to the age of 85. We'll monitor and assess our abilities annually in "retirement" and that will determine the future. However, health issues do occur. Include such things in your plans.
  • Step 6
Save significantly for retirement. Social Security was only designed to provide a portion of one's retirement financial needs. "Most financial advisors say you'll need about 70 percent of your pre-retirement earnings to comfortably maintain your pre-retirement standard of living." According to SS, if you have average earnings, your Social Security retirement benefits will replace only about 40 percent." " Most recipients receive between $700 and $1,800 per month in Social Security benefits." There is some evidence that future benefits may not be as generous as today's benefits. 
  • Step 7
Develop some idea of how you would like to live while trekking, and where. Where do you want to go? Where do you want to spend the majority of your time? Doing what?
  • Step 8
Try it. Rent an RV for a week or so. Rent something that you think you would like to own and trek in. Use it under the same conditions you think you would like to spend in your own RV. Learn from that experience.  Keep track of all of the costs.

  • Step 9
After trying a RV, review your plan. Adjust it if necessary.

  • Step 10 
Do additional long term planning.  Decide how much a RV may cost, and determine how much the lifestyle may cost, using the experience gained in Step 8.

Look seriously into the costs of food, gas or diesel, maintenance, health care, ownership insurance, entertaining, dining and so on.

Go online and pick a few places you would like to stay while trekking. Plug in the site rental costs. You may dream of boondocking, but that may not be a realistic lifestyle. We decided it could be a part of our trekking style, and it has been.

So how many days a year will you be trekking as in moving from place to place? Every day on the road uses gasoline or diesel and consumes a portion of the useful life of the engine and chassis of your rig.  The more you travel, the more fuel you will use. Travel also does consume the tires and accelerates the maintenance interval.

Take all of these numbers and determine your startup costs, annual costs, and add in a 15% "contingency".
  • Step 11  
You will now have sufficient information at your finger tips and the knowledge to execute the plan you develop.

Working in Retirement or while Trekking
If that is something you want to do, the I'd suggest looking into "workamping". There are ample online resources about this, including groups on social media. One of the issues of trekking is costs. Workamping provides the opportunity to stay in one location for a time; that means no gasoline or long distance travelling expense. It also provides the opportunity to explore an area. Finally, it may provide "free" rent and electricity while providing  free services and/or utilities in exchange for the services you provide. Do your own research into the benefits and problems of workamping and see if it might be for you.

I have not yet been a workamper. I've been fortunate that my skill set allows me to earn money while trekking in providing technical services and creative writing. We have discussed this and who knows, it could happen.

It's a big country and even larger continent
If you, like me, are interested in seeing a lot of this country, I think we Americans are fortunate. Lots of wonderful national and state parks, towns of all sizes and types, as well as big cities. A very large, geographically and culturally diverse country. Wonderful to trek in.

We've only trekked about 29,000 miles since December 2013. Less than four years of such trekking. But we've seen an incredible amount of the U.S.  That's because we "base" in certain locations and then travel from there. As a result, we spend a lot more time "seeing" things than travelling to things. It also reduces our actual travel costs. Less gasoline and less wear and tear on the Roadtrek, too.

Furthermore, many large cities have train service from the suburbs. Boston, Chicago and New York come to mind. I have travelled on the BART in San Francisco, but not recently. It is easy to spend some time on the outskirts and then take the train into the city for a long weekend.

In fact, Chicago Metra has a special "weekend pass" which is a wonderful bargain. $8 per person, special rate for children. I'm sure there are other special rates available in other cities. We've travelled by train in New York State, and Massachusetts.

A good Road Book
There are a lot of resources out there. One of my sons purchased a book which has a lot of good road information. I have the 6th Edition. The current edition is the 7th. I'll pass it along. This is a book "Covering more than 35,000 miles of classic blacktop":
  • Road Trip USA - Cross-Country Adventures on America's Two-Lane Highways, Jensen.



Road Trip Software
We use Microsoft "Streets and Trips" PC based planning software a 2013 version. MS discontinued this program but there are other approaches. We also use "Allstays" android app and google maps when trekking. The onboard GPS keeps us from making serious mistakes, but one has to check those routes. The "TomTom" I call "DumbDumb" and the Verizon VZ Navigator on the android smart phone provides real time traffic and incident updates.

"Streets and Trip" PC screen, a segment of a recent trek 

When we tire of the 48 States
After the lower 48, there is always Canada and Alaska to visit. We aren't sufficiently adventurous to consider Mexico and South America. But that might change.

Retiring Early - an Escape?
There are many posts and blogs about "retiring early" and travelling, or working while travelling. I'm not here to promote early retirement. It might not be useful to see "retiring early" as a means to escape from a life of work. Doing so may put into play some serious obstacles to financial well being in retirement. Planning a normal retirement at age 65 implies working to the age of 65 and then living in retirement for 30 years. I had great difficulty planning a normal working life of 40 years. There were a lot of detours along the way. That's one of the reasons I worked 52 full time years, delayed retirement and then continued working part time in "retirement".  By doing so I will spend fewer years in retirement. For anyone who has difficulty planning for a month, much less a year, planning for 30 years in retirement seems oddly irresponsible. I can deal with 20 years or so.

Prudence dictates that we consider that retirement may be even more challenging than normal work life. In retirement there are the realities of living on retirement income and dealing with failing health. My golden years may prove to be golden only for the health care and insurance industries.

This post will review a few approaches and will indicate what worked for me. Your experiences will probably be different. However, there are some fundamental similarities.

I suggest that we each:
  1. Find our purpose in life and make money doing that. This may extend our working years.
  2. Save a lot of that money for retirement while working and honoring our other financial obligations.
  3. Continue working beyond social security "full retirement age". 
  4. Once at "full retirement age" move into "phased" retirement which is cutting back on work hours each year while continueing to save.
  5. Trek while in phased retirement. 
  6. Do what we can to balance work and recreation. 
  7. Consider volunteering. 
I have done all of the above, and continue to do so to this day. This blog is my journal about some of my discoveries about trekking since 2013, when I reached a formal retirement age, but continued to work, and I do continue to work (earn some income) even as of the date of this post. However, I don't earn from posts, blogs, ads, etc. I actually do perform other "work" which includes creative writing elsewhere and some very technical industrial engineering. 

Note:
  1. My apologies to author M. Scott Peck, who is the author of a famous book by that name. I have a copy of the 1978 publication. Peck's book begins with "Life is Difficult."    For more information about Peck and this remarkable book go to:


Saturday, September 30, 2017

AGM Batteries, Separator Operation, Charging and Voltmeter

Replacement Battery Separator



Bookmark and Share


December 2019:
I installed a replacement battery separator and it works differently from the old one. See Note 5 in the Battery Separator section, below.

September 26, 2019:
After I installed the digital voltmeter I was able to more closely monitor the coach battery voltage as well as the operation of the separator. Earlier this year I purchased a replacement separator as a "spare".  The old separator seems to work inconsistently or intermittently. For example with the engine running and a 14V chassis battery voltage the separator will connect the chassis and coach batteries. But sometimes it does not!  Go figure. I've decided to install the spare and I'll provide an update after I do.

October 6:  I added information on "clicking" battery separators. This has been reported by owners.
To go to the section on the battery separator, click here: Click here to go to the post section about the battery separator.

June 26, 2019 added the SOC table for the AGM batteries in my 210P. Note, I replaced those batteries and the table for your batteries may differ.

July 3, 2019 clarified separator main and aux connections.
================================================

Read the notes at the end before proceeding! This post is not a recommendation that owners perform their own electrical service. Working with electricity can be dangerous and can result in personal injury, or death or damage to your Roadtrek. 
Sorry if I created a scare, but one does have to be careful if tinkering with electrical systems. Mistakes can be very costly, or can result in personal injury.




My 2013 Roadtrek 210P has:
  • 2 x 6 volt AGM coach batteries, about 220Ah
  • Tripplite 750W Charger/inverter
  • Battery Separator (bidirectional)
  • LED 12V display (four round indicators)
  • Digital 12V display (added by me)
  • Onan generator (2800 watt)
  • 50 watt solar panel, for charging the coach batteries (added by me)
2013 Roadtrek 210P display/switch panel
This is the display/switch panel on my 210P. In the photo the Onan generator is running and supplying 120VAC power. The Battery Disconnect is ON and this is indicated by the Battery On blue indicator. As a consequence the batteries are charging:

Charging the coach batteries
It is possible to charge the coach batteries:
  • While on 120V "shore power"  and using the Tripplite
  • While running the vehicle engine (see the Battery Separator section for limitations)
  • By running the Onan generator and using the Tripplite.
  • On solar
The limitations of the battery LED indicator
The LED indicator of the Roadtrek is a voltmeter which is somewhat limited. It indicates these battery conditions while the soft BATT button is pressed:
  • L - Low
  • F- Fair
  • G- Good
  • C- Charging
Note that the "C" indicator may be on even when the battery is discharging. This may occur shortly after disconnecting the coach from AC or stopping the vehicle engine. The reason is because the coach battery voltage is higher than normal 100% charge. This is what is called a battery "surface charge" and after a few minutes with a small DC load such as the slowly running roof fan, this charge will be dissipated and the true condition of the battery will be indicated. 

In the photo the Battery Disconnect switch BATT is ON as indicated by the illuminated "Battery ON" light. Pressing the Battery button displays the battery situation. The highest (rightmost) illuminated indicator displays the condition, which in the photo is a C for Charging:


Using a Voltmeter to Monitor the Battery Voltage
Monitoring the coach battery voltage is helpful for determining battery capacity. We may want to know how much energy is available in our coach batteries. A voltmeter is useful for doing this.

My Roadtrek didn't have a voltmeter, and the power/switch/display area isn't set up for one. However, there is a 12V "cigarette lighter" style receptacle in the rear overhead compartment, above the DVD player. Unplugging my powered antenna allows me to plug in a voltmeter to check the battery voltage:

12V receptacle

Here's a typical digital plug-in voltmeter. These can be purchased for as little as $7:

Plug-in Digital Voltmeter
What does that voltmeter display mean?
Here's a typical chart for AGM batteries. If we are aware of the voltage at the batteries, we have a rough idea of the "capacity" remaining. For example, if your voltmeter displays 12.50 volts, then you have used about 20% of the capacity or available energy in your batteries. However, I must note that it is not recommended to fully discharge batteries to 0%. That will ruin them.

You will have to decide how low you want to run your batteries. For longest life under moderate temperatures (77F is ideal) some recommend not dropping below 50%, or  about 12.05V.  Dropping to 20% (80% discharge) reduces battery life, but provides energy for a longer time. That's discharging to about 11.66V. Going lower will severely reduce battery life. Fully discharging AGM batteries can damage and ruin them. What does repeatedly discharge below 20% mean? It means severely reducing battery capacity, to the point the batteries cannot provide energy when disconnected from the Tripplite charger (when charging the battery).

Note that you might have poor batteries and be unaware. The 750W Tripplite inverter/charger can provide up to 45A (amperes) of charging current when on shore power. That's about 540 Watts. The Tripplite can not only charge batteries, but also power 12V DC appliances including lights, fan, propane furnace and so on when the Roadtrek is connected to shore power, even with poor batteries.

Having a voltmeter helps to determine just how long your batteries can support your RV when you are disconnected from AC power. For example, suppose you are running your fan, there are interior lights on, the occasional water pump, and your 3-way refrigerator is on propane (some 12V is used). After three hours the voltmeter indicates 12.5V. That means it took 3 hours to use about 20% of your battery capacity. Another 3 hours will use an additional 20% or more. That implies you'll have enough battery power to make it through the night (lights off, pump off and fan on).

This table is typical. Your AGM batteries may vary somewhat.
Typical AGM Battery Table
I replaced my AGM batteries and this is the SOC table provided by the manufacturer.  Your batteries may differ:


What does "reducing battery life" really mean?
AGM and gel lead-acid batteries are chemical devices. They generate electricity using lead plates or mats and an acid liquid. As we repeatedly discharge these batteries, certain deposits form inside them that reduces the capacity. Capacity is the ability to deliver full current for a certain amount of time before the voltage decreases below a useable level. As batteries age, that ability diminishes. For example, a new, fully charged battery can provide a specific amount of current for a specific length of time. Think of this as ability to run your fan, lights, DC for a propane refrigerator and a laptop. With new batteries, you might be able to do that all night. As the batteries age, the length of time decreases and you will find the batteries can no longer do so. And the lights will go out before dawn, whereas before they could be left on all night.

Alternative Voltmeter
I decided to add a digital voltmeter/ammeter. The advantage is I can monitor the amount of current being used and the digital meter provides me with a better idea of the "state of charge" and how much electrical energy might be available. The higher the current, the faster I will drain the batteries. The meter includes a Watt hour counter ("energy"), so I can roughly monitor how much energy is used overnight, should I choose to do so. The meter includes both high and low voltage alarms. This is detailed in another post:


The following data is according to the Tripplite 932768 manual for  750 Watt "PowerVerter DC-to-AC Inverter/Chargers", the Tripplite data sheet and a Roadtrek Manual

Charging the AGM batteries
The batteries can be charged from 120VAC. This is either via shore power or by running my Onan generator. One thing to keep in mind is to turn ON the battery disconnect switch before plugging the RV into AC power or starting the Onan generator. That is per Roadtrek recommendations for my RV.

How long can it take? If the batteries are depleted, it can take 12 hours or longer to fully charge the batteries.

Are there circumstances under which I can't charge the batteries? If  the battery voltage decreases to below 10.0V (+/- 3%, or somewhere between 9.7 and 10.3 volts) a low voltage cutoff will occur. The Tripplite inverter/charger will not charge the batteries if the battery terminal voltages fall that low.   If your vehicle engine is running, the battery may be charged via the standard alternator, if the battery separator allows (see the Battery Separator comments below). A underhood battery separator isolates the chassis battery from the coach batteries when the engine is not running.  However, batteries below 10.5 volts should be checked. They could be damaged.

How can I determine the state of charge? The Tripplite charger/inverter includes a display. However, it cannot be viewed without removing a cover.  Here is a photo with the cover removed. The Tripplite has two rows of LED indicators. One blinks green when on 120VAC and the Inverter switch is "OFF". Otherwise if on 120VAC and the Inverter switch is "ON" then it will be steady green. The switch is located on the Roadtrek display/switch panel near the side entry door. (see the first photo in this post, above).

The other Tripplite indicator goes from off to red to yellow to green depending upon the state of charge of the coach batteries. If charged more than 91% and on AC, one will be blinking green (on AC and inverter off) and the other will be steady green (91% or better charge).

The Tripplite is located in an interior compartment to the left and in front of the powered sofa when you are facing the rear of the RT. The Trippite has a fan and at times you will hear it running. However, there are exposed connectors/wiring so you do need to be careful. If you have any concerns, get a pro to do this.  DO NOT TOUCH ANYTHING.  After you have a pro demonstrate this to you, you can decide if you want to do it yourself in the future.

To reveal the Tripplite, lift up on the top wooden cover at the front and then slide it forward.

Tripplite and DC Electrical Compartment
The next photo is a close-up of the indicators on the Tripplite. The arrow points to a flashing green LED. That means the Tripplite is on AC with inverter OFF. The other indicator which is below the blue cable is the charging indicator. In the photo the bottom LED is green which according to the Tripplite manual indicates "battery capacity charging/discharging 91% - Full"

Here's the table from the Tripplite manual. There are a number of switches for configuring the Tripplite. These LEDs function with Switch in "AUTO/REMOTE" or “Charge  Only” Position. That is how my Roadtrek was delivered.

Approximate Battery Charge Level while charging and discharging (bottom indicator in the photo below):
  • Green = 91% to Full Capacity (see the Tip below)
  • Green and Yellow = 81%-90%
  • Yellow = 61%-80%
  • Yellow and Red = 41%-60%
  • Red = 21% to 40%
  • All three LEDs off = 1% to 20%
  • Flashing Red = 0% (Inverter shutdown)
Tip: How can we determine the Battery Charge Level above 91%?  At about 91% the AC power of the Tripplite is about 10 amperes. At about 100% charge it will decrease to 2 to 4 amperes, assuming the inverter function is OFF. Monitoring the AC current consumption of the Tripplite can aid us in determining the battery charge level above 91%. I have a Progressive Industries EMS on my 210P and I can monitor the AC current consumption. If you have a similar arrangement, so can you. However, you do have to avoid running anything else in the coach to get a reliable reading from the AC draw of the coach.

Tripplite Fault Conditions (bottom indicator in the photo below):
  • All three flashing slowly (1/2 second on, 1/2 second off) = Excessive discharge (inverter shutdown)
  • All three flashing quickly (1/4 second on, 1/4 second off) = Overcharge (Charger shutdown)
The arrow in the photo points to the 120v power "Line green LED":
  • Steady Green = Roadtrek inverter switch "ON" and the coach is on AC power (shore power or Onan generator)
  • Flashing Green = Roadtrek inverter switch "OFF"
  • Yellow = Roadtrek inverter switch "ON" and Coach battery providing power to 120V receptacles via the inverter.
  • Red = Roadtrek inverter switch "ON" and power demanded of the inverter exceeds 100% load capacity

Tripplite LED Indicators
Tripplite Operation and Inverter Selector
The Tripplite has a 3-way slide switch for selecting the "Operating Mode". See the photo below:

Left Position - Auto/Remote
Center Position - DC OFF
Right Position - Charge Only

The "Auto Remote" position ensures that the connected equipment receives constant, uninterrupted AC power. It also permits the Inverter/Charger to be remotely monitored and controlled (in my 210P the Roadtrek inverter switch turns on and off the "inverter" operation if the Tripp-Lite slide switch is in this position).

The "DC OFF" position de-energizes the unit and connects AC OUT to AC IN. In my 210P this slide switch position disables the Roadtrek inverter selector.

The "CHARGE ONLY" setting allows the Tripplite to charge the batteries faster by turning off the inverter, which halts battery discharging.

Operation Switch in DC OFF position

Battery Separator.

Battery Separator - Bidirectional
The battery separator is under the vehicle hood. It controls the connection of the vehicle battery and the coach batteries. In my 210P the battery separator is a "bidirectional" 200A module with a relay for 12V systems. You may have a "unidirectional" model and if so, your battery separator operates differently than the following; for a unidirectional separator see the description in the next section.

The [bidirectional] separator monitors the engine ("Main") and coach ("Aux") batteries. The manual states "If either battery bank is above the connect threshold [13.2V], the relay [closes and] connects the two banks together. If either battery is below the disconnect threshold [12.8V] the unit will open the relay." However, once connected both batteries are at the same voltage. Opening the relay disconnects the engine and coach batteries, preventing the draining of both.  "The connect threshold is set to a nominal voltage of 13.2V, which would only be reached when the charging system is operating. The disconnect voltage is set to a nominal 12.8V, which is near the full charge resting voltage of the batteries. " 

I've monitored the separator and it seems to be intermittent. At times, if the coach battery voltage is less than 12.8V the engine battery will not charge the coach batteries because the separator disconnects if either battery bank is below that voltage. When this occurs, the battery must be charged via 120VAC (shore power or Onan generator). Or via solar. In other words, the battery separator in my Roadtrek doesn't seem to consistently connect my vehicle alternator to the coach battery if the engine battery is 14V and the coach battery is less than 12.8V. That's a coach battery that is 90% charged. See note 7.

According to the separator manufacturer:  The connect threshold is set to a nominal voltage of 13.2V, which would only be reached when the charging system is operating. This will cause the relay to close and the charging system can charge both banks of batteries. The disconnect voltage is set to a nominal 12.8V, which is near the full charge resting voltage of the batteries. This will cause the relay to be opened shortly after the engine is stopped, attempting to preserve 100% of the starting battery capacity for engine cranking."

Note 1: In my Roadtrek the terminal labelled "Aux" is connected to the coach batteries. The terminal labelled "Main" is connected to the chassis battery:

Note 2: The vehicle alternator (Main)  will connect to the coach batteries (Aux) if either the vehicle or coach batteries are above the "connect" threshold of about 13.2V, which is 100% charge. After connecting the batteries will remain connected unless one of the batteries falls below 12.8V. This was confirmed with a new battery separator. See Note 5.

Note 3 :  The separator includes a momentary "auxiliary start function".  The start terminal must see at least 3V* to activate. The auxiliary [coach] battery must read at least 10V*." "This is the input for engine start signal override. When power is applied to this input, the relay will close if the Aux. Battery [coach] is no less than 0.85 Volts below the Main battery [chassis]."  In my Roadtrek this is not used.

Note 4:  According to the separator manufacturer, "* = Typical voltage settings have a +/- 2% tolerance".

Note 5:  Update December 2019. I replaced the battery separator and the operation of the new one is different than the old one.  If either the coach or engine battery is above the "connect" voltage threshold of about 13.2 volts  then the separator connects both coach and engine batteries.  I've monitored this for several weeks and the operation is consistent. If the engine is running the engine battery voltage is about 14.0 volts and the separator connects the engine battery to the chassis battery. If the engine is not running and I connect the Roadtrek to shore power, the Tripplite charge voltage rises to above 13.4 V and the chassis batteries and Tripplite are connected to the engine battery. This is not the way the old separator operated and I can only assume that the old separator had a flaw or failure.

Separator Options
The separator includes some options, including a "start signal" but that is not wired on my Roadtrek. The "start signal input" is the input for engine start signal override. When power is applied to this input, the relay will close if the Aux. [coach] Battery is no less than 0.85 Volts below the Main [chassis] battery.


Where is the Separator located?
The battery separator is the device in the center of this photo with the two red rubber boots. In my Roadtrek the terminal on the right is labelled "Aux" and is connected to the coach batteries. The terminal on the left is labelled "Main" and is connected to the chassis battery:



Alternate Battery Separator - "Unidirectional" Type
The battery separator is under the vehicle hood, see the photo above. It controls the connection between the vehicle battery and the coach batteries. In my 210P the battery separator is a "bidirectional" 200A module with a relay for 12V systems.  The following is the description of a "unidirectional" model. These two models operate differently. You need to determine which you have in your RV.

The unidirectional separator is a 200A battery separator modules with an integrated relay for 12V systems. The separator monitors the engine and coach batteries. If the Main battery is above the connect threshold, the relay connects the two battery banks together. If the Main battery is below the disconnect threshold the separator will open the relay. You will have to determine which battery bank, Chassis or Coach is connected to the "Main" terminal.

The connect threshold is set to a nominal voltage of 13.2V, which would only be reached when the vehicle charging system is operating. This will cause the relay to close and the engine charging system can charge both the engine and coach batteries. The disconnect voltage is set to a nominal 12.8V, which is near the full charge resting voltage of the batteries. This will cause the relay to be opened shortly after the engine is stopped, attempting to preserve 100% of the starting battery capacity for engine cranking.

Battery Separator - Bidirectional - "Clicking"
The battery separator is under the vehicle hood, see the photo above.  From time to time, you might hear a "clicking" sound if your hood is open. That could be the relay of the separator opening or closing.

For a bidirectional separator the relay will close as noted above if the vehicle battery/alternator is above 13.2V and the coach batteries are above 12.8V. Or vice-versa. If either of these falls below 12.8V the relay will open. When the relay closes it connects the vehicle battery/alternator to the coach batteries and when it opens it disconnects or separates these batteries.

The bidirectional will connect the vehicle and coach battery systems if the coach rises about 13.2V and the vehicle is above 12.8V.

At rest, my vehicle battery is about 12.6V. Fully charged my coach batteries are about 13.2 volts after dissipating the "surface charge".

If one has a solar charging system for the coach batteries, it would be possible for intermittent connection of the two systems if the solar system rises above 13.2V and the engine battery is above 12.8V.  Depending upon load and sunlight conditions, if the coach battery falls below 12.8V or about 90%, then the separator relay will open, disconnecting the vehicle and coach batteries. If the sun comes out, or solar improves and the coach battery terminal voltage increases to above 13.2V (which will happen while charging) then the separator relay will close, connecting the two battery systems.  As the coach battery discharges, the terminal voltage will decrease. When sunlight increases, then the separator will again close the relay, "click" and the two battery systems will be connected.

Of course, a faulty separator may also close the relay at unexpected moments.

Solar.

Solar:
In 2014 I  added a 50-watt solar panel and a desulfating solar controller.  Using a 50-watt solar panel provides a maximum 4.17 amperes of charging current at 12V during peak sunlight conditions. That's more than sufficient for maintaining or topping off the batteries.



Notes:
  1. This post is not a recommendation that owners perform their own electrical service. Working with electricity can be dangerous and can result in personal injury, or death or damage to your Roadtrek. 
  2. This information is provided "As Is" and no warranty or claim of accuracy is given. Your Roadtrek and its equipment may be very different than what is portrayed here. 
  3. Refer to the Roadtrek owners manual and the Tripplite Owner's Manual for complete information. 
  4. The Tripplite inverter/charge includes 120V surge protection. In other words, outlets that are powered by the "invert" mode will have surge protection. Any others in the coach will not have any surge protection unless it is added. In my case, I have an electrical management system (EMS) on the shore power line. I don't have such a thing on the generator power output. 
  5. For troubleshooting of the Tripplite, refer to the owners manual. 
  6. This post is based on several other posts in this blog as well as recent social media posts by me. I'm providing this so I won't have to write this up again. 
  7. My coach batteries exhibited difficulty at about 3 years. I suspect the problem was the model battery separator Roadtrek installed in my 210P. The separator won't connect the vehicle alternator to the coach batteries unless the coach batteries are at 100% charge. 
  8. All info on the battery separator is per the manufacturer's data sheet. 


Wednesday, September 27, 2017

Are opinions precise? A guide to more precise language.


Bookmark and Share



I pose the question because of the observations I have made of posts at a variety of social media sites or blogs.  You should include mine in this question. I've provided a rebuttal to a few questionable posts and of course, this wasn't well received by all.

I do consider social media to be an advertisement laden "free for all."

Critical thinking skills = the use of logic, reasoning and facts.

Here are a few observations
One common mistake for the writer is to use imprecise language, although sometimes that is deliberate. A common error by the reader is to infer a specific meaning from imprecise language, or to take another's experience and assume mine will be the same. That is not necessarily so. Sometimes we use imprecise language when we don't know the facts. Others may read what I or others write and assume it is factual. It may not be.

There are times when imprecise language is used for a purpose, or to promote an agenda.

There is a fair amount of hyperbole on social media sites, with all sorts of opining. From time to time there is intellectual dishonesty.  I cannot state what motivates others. However, from time to time I do read an opinion supported by imprecise language or incomplete data. Usually that data has been  selected to support a specific opinion or outcome to the exclusion of all other opinions or outcomes. That's an example of intellectual dishonesty.  For example, one approach is to state that my experience is "typical."  That is grossly misleading. Another approach is to say that "Many people have had the problem I have experienced." For example, if I experience a problem it is appropriate to say "I had a problem and others have experienced this" (if it has been previously reported) and then describe it. It is misleading to state that "my problem" has been experienced by "many" or even a "few". Why? Because we usually don't have any precise statistics to support these opinions and experiences, and terms such as "many" or "few" are very imprecise and subject to interpretation.

In other words, "my experience" might be useful and it might not, depending upon how it is framed. It might be indicative of the whole or it might not.  The description might be filled with my opinions and a dash of facts to make it look authentic, or to justify my opinions.  It is useful to be aware that things do break, that maintenance workers make mistakes and so on. But how useful?

But Facebook asks "What's on your mind?" and that's what we get. Sometimes just blabber, sometimes a mind dump, and sometime just rants.

This unfortunately sets the stage for unrealistic expectations. After all, if we begin to think that opinions are facts, we then are in a place where fiction is construed to be reality. More on that in a later post.

For example, if I state that my Roadtrek experiences are "typical" the reader will be led to believe that my experiences "have the distinctive qualities or characteristics of a particular type of person or thing".  In other words, you, dear reader, will have the same experiences I have if you have a Roadtrek. That is of course, not a certainty.

If I were to say "Many people have problems with their Onan generator" that means that "a large number of" people have had problems with their Onan generator. Or, it might be construed that "the majority of people" have had problems with their Onan generator.   Both conclusions cannot be determined from the use of the word "Many". In other words, conclusions based on the word "many" are probably false.

On Facebook in particular, it seems that some of the readers think that what is written is indicative of everyone. Or it is accurate. That's not necessarily so. It might be very imprecise. It might be hyperbole, or hubris or simply baloney.

Opinions
"Opinions" are defined as "a view or judgment formed about something, not necessarily based on fact or knowledge."  If opinions are not based on fact or knowledge, then what are they? It seems some do really believe that "opinions" are facts and are presented as such. But they aren't.

FB isn't alone in this, and merely provides an advertisement laden opportunity for us to present our version of reality. A variety of blogs also provide rose covered views of everything from winter trekking to using composting toilets in Class Bs. There are FB groups ranging from "Living the RV dream" to "RV Hell". They are two different sides of the same coin.

It is important to remember that opinions expressed are those of the writer and that includes this blog. Whatever is expressed may never be "typical", or even useful (that's an altogether higher standard).  If one person's experiences were always "typical" then I guess I could expect to win the lottery because my neighbor did? Or should I expect to die in a car crash because an acquaintance did?

Some of us may absolutely love our RV and will ceaselessly write glowingly and enthusiastically about it. It is also possible that we are frustrated or unhappy and we may have an axe to grind. That disenchantment will color whatever is written. Some are clever about this, and so they may provide some knowledge or useful information but use it as an opportunity to also present their agenda. Yes, Virginia, people do have personal agendas. Some are harmless, and some are not.

How can we tell who is who? We can't unless the author is very careful in his/her languaging and writes with integrity. In the absence of precise language, a reasonable alternative is to provide some information to the reader about our condition in life, our expectations and a broad view of our experiences. These things do color what we write. I've made it a point to create this blog, which not only forms a journal of sorts, but is also a body of work with data where appropriate. The reader can decide if I am full of hogwash or not. I do not set landmines for the unsuspecting.

The reader has the responsibility to use critical thinking skills if seeking solutions. After all, everything we read on Facebook isn't intended to simply be entertainment, or  complaint session. Or is it?

Example of looking for a select answer
When we post questions on social media, we are obviously looking for guidance. Some of the questions are predisposed to a specific answer, and some responders may be inclined to provide what is sought.  For example, recently there were some FB posts on RV sites about winterizing. Some might ask "Is winterizing really necessary?" That very question may be the result of a personal position called "I don't want to winterize" and responding can set up some serious consequences. According to Roadtrek "winterizing" is an absolute necessity under specific weather conditions. To imply to anyone that it is otherwise is leading them down a primrose path. It may provide them with the answer they want to hear, but that path is an unreasonable one. Ergo the title of this post.

So what's real?
First, if you read it on an opinion forum, it possibly isn't real as in completely accurate or authentic. This is why "news" might not be news. Some of what we read is opinion, perspective and so on.  I can't say how much is or isn't. Some is untruthful or misleading.   Today in "news" the first thing to realize is that this is a really big planet with 7 billion inhabitants. Whatever is considered to be newsworthy has to be seriously edited; there simply isn't sufficient time or space for all "news" on a planet inhabited by about 7 billion human beings.

The first thing to do when reading FB or any other social stuff is to use one's critical thinking skills.

When one posts, one must decide what to post and what not to post. That is a form of self-censorship or self-selection. People have a reason for posting what they post. As a reader, ask yourself "what is their purpose in posting this?"

Then look for words indicative of opinions or attempts to manipulate the reader. Here are a few examples:
  • I think......
  • I believe......
  • I feel.....
  • In my opinion......
  • The best......
  • I strongly believe.....
  • From my point of view......
Here's a link to a list of opinion words and phrases:

opinion_words_and_phrases.pdf

Imprecise Words
Another approach for inserting opinions is to use imprecise words. Such imprecise words include:
  • Can
  • Few
  • Fair
  • Frequently
  • Many
  • Most
  • Occasionally
  • Often
  • Regularly
  • Several
  • Temporary
It is recognized that imprecise words can alter the meaning of any points that are presented in writing. For example, the use of “can” instead of “will”.  Stating  “I can earn $1 million this year if I work hard” is not the same as “I will earn $1 million this year if I work hard”. The use of "can" indicates that earning $1 million is merely possible. Using "will" changes that earning to definite.

It is important to use "strong" words to express ideas and to accurately indicate to the reader those things on which they should focus.  Selecting a precise word greatly improves the clarity of a sentence.  That is important in writing.


Wednesday, September 20, 2017

You Purchased a Rv and are Picking it up. Now What?


Bookmark and Share



A little Reading - A few of the manuals that came with the Roadtrek
Once we have made the committment, selected the product we want and made the order, or selected it from the showroom floor, there comes the day that payment transfers hands, and a lot of papers are to be signed.

Wait a moment!

One of the big parts of this handoff ceremony is getting a walk-through of the features of your new rig. Be it a Roadtrek or whatever, these are complex vehicles. Your walk-through will serve two purposes:
  1. Provide you with training and education about your new RV
  2. Provide you with a demonstration that all of the features and accessories are working. 
Some of these vehicles are really complex. If this is your first RV, or if you had one which is more than 10 years old, you might be shocked by some of the technology in today's RVs.

Please do a very thorough checkout.

Once you take delivery, then all of the issues become "warranty issues." These are treated differently than point of sale issues. So it is best to identify any issues before taking delivery.

Once you do take delivery, you may find yourself in a long queue of people wanting service.

Some Good Ideas

Arrange for the full feature demonstration. However, also arrange to stay in the RT overnight so you get to try it and make a list a questions that occur to you during that overnight stay. You will find that the "walk-through" is fast paced. If you want a good trekking experience there are things you will need to do, and things the dealer will have to do. This post is directed to Roadtrek purchasers, but the points made work well with all RVs.

Keep in mind that the moment you drive off of the lot, you should know enough to connect to "shore power", spend the night and a day at a campground, be able to connect to fresh water,  fill the onboard fresh water tanks, switch between city water connection or tank water and operate the hot water heater. You should know how to dump gray and black water tanks. You should know what the various readouts and displays mean. You should be able to operate the refrigerator, and cook your meals. You should know how to use the thermostat and select furnace or heat pump or AC, assuming you have these. However, a lot of this will require you reading the various appliance manuals that came with your RV.

Be prepared to spend some time reading all of these manuals, and you will have to do some experimentation. That will be a wonderful exercise during your first trek. I suggest you plan one for mild weather.

So how to accomplish this in a short walk-through? You might think this is trivial, but a couple of weeks after taking delivery of our 210P we headed south to warmer weather. En route the weather changed from 50F during the day to about 5F at night. We found ourselves winterizing in a gas station as darkness fell. "Be Prepared" is a good motto for kids (Boy Scouts) and if 13 year olds can master this, so should adults. But it might be a bit more intimidating than you expect. Your walk-through is your opportunity to be educated and to be prepared.
  1. Before going to the dealer make a list of everything you ordered and every accessory. Every appliance, option on the RT, etc.
  2. If you can, download and print out a copy of the current manual from the RT website and bring it with you so you can mark it up with notes. Keep the one provided by the dealer as a clean backup. 
  3. At the dealer, review all of the documentation. Do you have manuals for all of the features and accessories of your RV?
  4. Have the dealer demonstrate everything completely to you and take notes when they do. This includes battery systems, generator, any "auto start/stop", DC power systems. 
  5. Discuss the DC fusing and the AC breakers. Look at the propane detector and CO monitor and know how to reset and test these.
  6. Ask them to show you the batteries and ask about "resets" and so on.
  7. Ask them to show you the DC contactor and point out any DC circuit breakers or other "hidden" fuses.
  8. Ask them to show you the battery isolator so you know what it is.
  9. Have any solar panel system including controller demonstrated and understand the readouts.
  10. Have any inverter demonstrated and ask about "resets" or fuses or circuit breakers it might have. 
  11. Fill the water tanks both from city water and via the door mounted fill points. Partially drain the tanks and note the operation of the tank level indicator.
  12. Have the valving demonstrated to you for operating from inside fresh tank or exterior tank (210P). Note the positions of all of the valves for this.
  13. Run fresh water via the tanks with pump and via city. Have them tell you how to isolate the hot water heater and describe and show you the anode in that heater.
  14. Ask about how to winterize and the procedures.
  15. Try absolutely everything including the macerator and dump both gray and black tanks, so you open and close the gate valves, etc.
  16. Run the propane appliances be it hot water heater, furnace and range top. Have them show you how to open and close the propane valve and where it is.
  17. Try the stereo and TV systems; bring DVD and Blue-Ray discs with you, assuming your RV has a blue ray player.
  18. Know how to switch the TV antenna from roof top to cable, or Satellite, is so equipped.
  19. Try all interior lights and all doors and latches.
  20. These are complex vehicles and treat them accordingly.
  21. Also ask about a list of optional, user provided "accessories" including water pressure regulator, water filter, and even a shore power protection device. Get their knowledgeable opinion.
  22. You don't have to jump in and buy anything until you are confident but not before taking a trek. I understand Roadtrek says you don't need a120V power protection device. Ask wny.
  23. Have some fun.
  24. Once you have taken delivery, make a list of all of the accessories. 
  25. Download pdf files of all of the accessories; furnace, hot water heater, roof fan, air conditioner, microwave/convection oven, refrigerator, water pump, macerator, TV, DVD player, TV powered antenna, etc. If you can, look for "Owners Manuals" as well as "Service Manuals" and "Parts Manuals". These will serve you well in the years ahead. 
Now you have the  basic information, head on down the road and see how knowledgeable you are.

Have Fun!




Note:
The above is based upon a September 2017 post I made on Facebook


Monday, September 18, 2017

A Piney Squirrel Neighbor



Bookmark and Share


Our summer location has had a bumper crop of pine cones this year. With them came a piney squirrel. That little critter would sit high in the tree and cut loose green pine cones. At about 6am each morning we'd be greeted with a constant "thump, thump, thump" as the squirrel jumped from branch to branch cutting lose pine cones. There was also the occasional "thwack" as a cone hit the AC.

I'd go up on the roof and clear off the sticky cones, loaded with pine sap. The trees are finally barren of green cones and the sap is reduced.  The pace of cone dropping has moderated, but I've got quite a few piles on the ground.

I've added a few photos and a short video. That squirrel can strip a cone in 30 seconds or less. Thanks to his activities, we also have quite a few black capped chickadees and other birds hanging around, picking through the leftovers.

The "roof" is not that of the Roadtrek, thank heaven. It is a travel trailer on our summer "base camp" in Michigan. That base will shortly be shut down and we'll be Roadtrekking toward the southwest. Any plans for FL and the Florida Keys are now on hold pending the outcome of the recovery after this year's hurricane season.
















Saturday, September 9, 2017

Hurricanes


Bookmark and Share




On the Bayou, after Katrina
Floated into the Bayou by Katrina

Hurricanes are dangerous. I've had the opportunity to experience two hurricanes. I rode out a Category 4 hurricane, and the eye passed directly overhead at about 2:00am. The wall has the highest winds. Was like a freight train running by that want on, and on, and on. Not fun. Afterwards I had to live off of the water in the tub for a few days. I also was in New Orleans but left on the last departing airline flight before Katrina made landfall, and then returned to assist a client in the recovery of their business.