7 Pages are shown on the Main Page.

7 pages are shown on the Main Page. To see additional posts, click on the link "Older Posts" at the bottom of the main page. For videos go to https://www.youtube.com/@normanretzke4377/videos click "skip" to avoid ads


G has a "swell" time kayaking

G has a "swell" time kayaking
G has a "swell" time on Lake Michigan in an inflatable canoe

Dawn on the Gulf of Mexico

Dawn on the Gulf of Mexico
Dawn on the Gulf of Mexico

Warren Dunes Sunset

Warren Dunes Sunset
Warren Dunes Sunset

Monday, July 26, 2021

Roadtrek Propane Tank and Bleed Valve

 

Tank Rust - February 3, 2017

Bookmark and Share

Preventative maintenance of the Propane Tank

In 2016 I slid under the Roadtrek and did an underside inspection,  I noticed some dings in the propane tanks, flaking of the enamel and some rust. When at the Southwestern Lily Pad  I cleaned the tank exterior, wire brushed the rusty areas and then brushed on a coat of Rust-Oleum white enamel.  The location of the tank is such that it can be struck by rocks and stuff kicked up while driving.

The paint stopped the rust and based upon a recent visual inspection it is in good condition, 5 years later.

Note: It is my understanding that the tank on my Roadtrek is double-walled. I've been a member of the FMCA Roadtrek International Chapter since 2013/2014 and a recent discussion about propane tanks included this comment by a member: “I toured the Roadtrek plant in Kitchener, Ontario a year ago last October. Our plant guide said the propane tank is double lined and any deterioration to the outside is cosmetic and the tank itself should never have to be replaced. "  I can't say that is accurate. Nevertheless, I think preventative maintenance of the exterior is worth it.

I recommend the Roadtrek Chapter and it purports to be "about one of the TOP THREE FMCA Chapters in membership."

Specifications, my 210P:

Roadtrek propane tank size: 10 gallons. 

Weight of 1 gallon of propane: 4.2 pounds

My tank 80% full = 33.6 pounds of propane.

For reference: a small "green" disposable bottle holds 1 pound of propane. 

Photos of Roadtrek tank, before and after cleaning and painting:

Cleaned and wire-brushed


After painting with Rust-Oleum white enamel


Condition of the propane tank -  July 26, 2021

Propane Tank Outage "Bleed" Valve

Some of the Roadtrek manuals include a propane system diagram and a diagram of the propane tank. The tank diagram identifies the location of the fill, shutoff, outage valve and tank level gauge.  If you don't have a manual go to the official Roadtrek website and download one.  They are in pdf format.  Hint: Roadtrek made substantial improvements to later manuals.  Check them on the website and you may find a lot of useful information. Roadtrek website:

Roadtrek owners manuals

Here's a diagram of an RV style tank made by Manchester Tank Co. It is marked to show the "outage valve".  Next is a photo of one style of outage valve made by Manchester tank, and the third is a photo of the tank on my 2013 210P. This was taken with the rear access cover removed.  The arrow points to the "outage" valve. This valve is to be opened by the attendant when filling the tank.  When the tank level reaches 80% liquid will come out of the hole in the center, signifying a full tank.  In my experience, not all attendants do this and so at times the tank is not properly filled.  Usually the tank is underfilled because the attendant shuts off the propane fill at an arbitrary number of gallons.  I prefer to avoid gas stations because the attendants have been trained to fill propane bottles, and are not familiar with on-board propane tanks:


Manchester Tank Co - Illustration of propane tank showing location of outage valve
This is not a Roadtrek propane tank! 




One style of "Outage" or "Bleed Valve" -  Manchester Tank Co .

2013 Roadtrek 210P Propane Tank Bleed Valve - also called an "outage" valve



Main Propane Tank Valve & Components:


1 = Coach Propane Shutoff Valve
2 = Propane Fill Connection
3 = "Outage" valve
4 = Propane fill indicator and sensor for remote indication
Note: I removed the BBQ 10 PSI regulator & hose on my 210P.


Safety Labels on Propane Cover:
Roadtrek had specific safety guidelines.  This is the label on my 2013 210P:



Original Material: Roadtrek210.blogspot.com (c) 2021



Sunday, July 25, 2021

Walking up the Dune at Warren State Park

 

Walking toward the dunes at Warren Dunes State Park - 9:30am

Bookmark and Share

Last night we had a steady, heavy rain for a couple of  hours.  With breezes from the southwest we knew the smoke, soot and haze from the western fires including those in Manitoba CA would be blown out of the area.  Furthermore, the rain packs the sand, making the uphill walk easier. So, the next morning after a light breakfast we took a walk and climbed the largest dune near the beach. The walk into the park and up and down is a couple of miles in total. Sometimes we bicycle, but with the summer peak on a weekend, walking off the road is much safer. Not everyone observes the 20 MPH speed limit, nor does everyone drive expecting to encounter a slower moving bicycle on the curves that lead to the beach.  

Here's an aerial view of the Warren Dunes State Park, MI.  Courtesy of Bing Maps. The ellipse is the area we were walking in this morning:

Warren Dunes State Park - Source: Bing Maps - area in the photos

We always walk with shoes, or hiking boots. We've encountered rusty cans buried in the sand, bottle tops and of course, there is a lot of wood from long dead trees.  On this walk, we encountered a couple of barefoot teenagers on the dune.  One complained of a cut "from a piece of wood".  She was able to walk down and deal with it at the bottom.  We also carry water. Hydration is important.  It is surprising how many we encounter with no water.  Taking care of the children - NOT!

G zig-zagging up the dune

It is smart to zig-zag to the top to control the heart rate. I push a bit more than G, so I tend to go straight up, if conditions permit. Hard packed sand is easier to walk on, too. Our goal is to enjoy our companionship, get a nice workout, enjoy the breezes and views, avoid the crowd and have a good time.  On some trails there are switch-backs. On the dunes we create our own to the top and hike within our comfortable limits. 

Rain stippled and compacted sand - easier walking uphill


G nears the top, I'm facing south

Steep approach to the top


Looking back as I near the top - more level walking


Some shade near the top - 9:46am


G takes a break and enjoys the view

A pleasant view from the top

One of the rewards of this hike is the wonderful, cool breezes which are generally off of Lake Michigan.  The water temperature near shore is somewhere between 65F and 70F on any given day. That is a cooling influence. Another reward is the view in all directions.  At the top, there is even some shade. 


Near the crest of the dune, it levels and walking becomes easier

After enjoying the view and the breezes, we walk down and

Beach at 10:15am

toss skipping stones into the lake. The beach people are arriving in a steady stream.

It will be a fun filled crowd today, which is our cue to leave. So we hike out of the park and return to our site.


Original Material: Roadtrek210.blogspot.com


Wednesday, July 21, 2021

Grilling - Corn on the Cob and Baked Potatoes - Grill Comparison

 

Corn cleaned and soaking


Coleman "Fold-n-Go" propane grill - We carry in the side drawer of the 210P


Bookmark and Share

This post is about grilling corn on the cob and baking potatoes, and the grills and methods we use. We do a lot of outdoor cooking. Cooking outdoors is one of the joys and benefits of RVing in our Roadtrek.  There are also practical reasons including more outdoor space for cooking and if we cook outdoors we don't mess up the kitchen area. That reduces the daily cleaning chores. We can grill outdoors if temperatures are moderate.  At temperatures below 45F too much heat is lost and cooking is uneven. However there are ways to cook outdoors, all the way down to freezing if one is so inclined. 

To grill we carry a small propane BBQ in the side drawer of the Roadtrek.  However, because we do most of our grilling in four primary locations we do have a variety of grills available. Three are left at these locations and are available. When cooking outdoors we use propane or electric grills, as well as an electric resistance burner for boiling water for pasta, etc. We also carry an inductive electric burner in the Roadtrek. We use the inductive electric burner with cast iron to cook both inside and outside of the Roadtrek.  When used outdoors the inductive burner and cast iron are a no-mess option for cooking sausage or bacon in the morning. We prefer to conserve propane for use in producing hot water and for the furnace.  We have never used the BBQ grill propane hose that was included in our 2013 Roadtrek 210P. When the regulator for this hose failed for the second time, I removed that regulator and capped the propane piping.  To gain access to that 10 PSI regulator I had to have the rear bumper removed.  Twice is enough!

Our Roadtrek 210P camper van came equipped with three methods of cooking:

  1. .Microwave-Convection oven (electric).
  2. Two-burner propane range top.
  3. Short hose for propane BBQ grill, grill to be provided by the user. 

I added the following:

  1. Portable induction (electric) cooktop.
  2. Portable electric resistance stovetop burner.
  3. Propane BBQ.
Portable Gas Grills
We currently use four different barbecue grills, at various locations. All are modest in size.  My favorite is a Weber Go-Anywhere propane grill. It has precise temperature control, a sufficient cooking area, and a tall lid. But it doesn't fit well in the side drawer of our Roadtrek 210P.  In the Roadtrek we carry a Coleman Fold-n-Go propane grill.  Both of these use the small 16oz. green propane bottles. These bottles can't be recycled; I refill them from larger 20 Lb. bottles. A $6.95 adapter lets me do that and it not only reduces waste, this has saved me a lot of money.  At present propane where we are camping in MI is $3.69 a gallon at Tractor Supply and higher elsewhere. A 16 oz. bottle is about $3.70. I store 20 lb. bottles at each of the "lily pads" and that's where we store three of the larger grills. Two of these are propane and one is an electric Weber Q2400

Inductive electric cooktop and Lodge Grill/Griddle - Dinner inside while 15F outside
 - 


Cooking with the Coleman Fold-n-Go and the inductive electric burner with Lodge cast iron

Weber Go-Anywhere propane grill with 14.1 oz propane bottle

Comparison of the Coleman and Weber while on a trek.  Both have folding "legs". What isn't obvious in this photo is the greater height of the removeable lid of the Weber, which we have come to appreciate:

Coleman Fold-n-Go versus Weber Go-Anywhere

The most challenging of the grills to use is the Coleman Fold-n-Go which we carry in the Roadtrek. This is because of the small grilling surface and the low height of the lid.  For example, cooking corn on the cob on the Fold-n-Go can be difficult because the lid will not close completely if the contents are too tall. However, it has one very redeeming feature;  we can carry it in the outside storage compartment of our 210P.  However, we can use a Lodge cast iron reversible grill/griddle which we carry and which is in a photo here.  

We are currently at our campsite in Michigan, on the eastern shore of Lake Michigan. At this seasonal site a neighbor who was vacating put their dual burner Coleman LXE grill up for sale at a very attractive price. Because we are seasonals we purchased it and we store it on site over the winter, when we are elsewhere.  We also have a winter site and we store another grill there. We store a Weber electric grill at our Southwestern site. The Weber Q2400 was provided with a rig we purchased; the price was right; it was free!  After using it for three winter seasons I can say it works very well. 

Sunset tonight


For ease of grilling I like the electric Weber Q2400 better than the Coleman LXE 2-burner propane grill. However, with two burners and a larger cooking area the LXE has some advantages.  One issue with the LXE is it tends to run "hot" and for another, in prevailing breezes the burners will blow out.   I've made some simple modifications, including adding clay tiles, to better distribute the heat. I added a couple of makeshift aluminum foil wads on the ends to reduce the impact of breezes and re-direct airflow. I get better results this way. 

Two clay tiles to moderate the temperature.  The grill can accommodate three tiles. 

A segue into history

Where did I learn to grill?  From my father, who was a DI in the army in WWII. He made me responsible for all of the grilling at the age of 11. Building on that, for the next 20 years I grilled exclusively using charcoal and improved my craft. Charcoal requires a different skill set than does propane fueled grilling. Prior to that I was the short order cook for the family Sunday breakfast. Later I did a lot of camping with the children and as a youth group leader. We made it a challenge to cook exclusively with wood and if available we used a sheep-herder's stove with large flat surface; wood burning, of course. Backpacking and canoeing treks were all about efficiency and light and compact cookware. I camped from (-)25F to (+) 103F. Cooking in the wild is a totally different skill and beyond the scope of this post.

Grilling Corn on the Cob

One note: when I wrap in aluminum foil I put the shiny side inwards (facing the item being cooked) and the dull side outwards, toward the heat source. I want minimum outward reflection of the heat.

We are currently at our campsite in Michigan, on the eastern shore of Lake Michigan. We cook breakfast sausage and bacon outdoors on a cast iron skillet.  We also cook most dinners outdoors using BBQ grill, and cast iron. 

It is mid-July and locally grown corn is available for 50 cents an ear. We enjoy it grilled. Corn on the cob is an American phenomenon. Some years ago, a multinational client brought in a large number of technical staff from Germany. One night we all went to a BBQ and they were appalled that we Americans were ordering corn on the cob as a vegetable. It was understandable. In Germany corn is grown for pigs. German corn has large kernels and is very coarse. It does not resemble the sweet, tender corn that Americans enjoy. 

There are different methods to cook sweet corn. Some boil it but my favorite method is to grill it. I carefully pull back the husk, remove the silk, clean it, soak in water (or salted water), rewrap the husk, trim the excess stalk and wrap in foil.  I cook it for about 45 minutes on a medium grill, turning it at least once.  If the corn is late in the season or has been grown under adverse conditions, I will soak it in a mixture of water and milk.   I have been told that the lactose in the milk is an aid. I really don't know. But, soaking the corn be it in water or milk does improve the juiciness. 

Note: "Medium" heat setting varies from grill to grill. For example, on the Coleman XLE, with only one burner lit, Low" on only burner below the corn is sufficient. With the Weber Go-Anywhere, medium is perfect. Because of heat loss, the Coleman Fold-n-Go requires more tending because of heat loss if the top can't close completely over the ears.  If you want better results, or are new to grilling, then temperature monitoring is helpful. I'll post on that in the near future.

I don't shake the ears before wrapping in aluminum foil. I attempt to retain as much water as possible. The goal is to steam the corn wrapped in foil. I do think the husk improves steaming, adds flavor and it protects the kernels from overheating.  I may slightly overcook the corn and "burn" the husk but the odor is wonderful when the corn is unwrapped.  And, the kernels are fine, protected from overheating by the husk. 

Preparing the corn



Corn silk removed and ready for soaking


Cleaned corn soaking prior to trimming and wrapping in foil

I trim the stalk and then wrap in aluminum foil. I cook for about 40 minutes on "medium" heat, turning 1-3 times. However, grills are notorious for their inconsistency. So, it is best to avoid undercooking.  When the corn is nearly done, I'll add the burgers, or whatever. 

Corn grilling and almost done - add the burgers

After removing it from the grill, I unwrap the foil.

Removed from the foil

Husk removed - butter and then eat


Russet Potatoes on the Grill
Another favorite is baked potatoes. I scrub the potato using a brush for this purpose. When dry I rub with olive oil and then salt it. After that, I wrap it in aluminum foil. To facilitate cooking I use an aluminum skewer or nail.

Oiled and salted potato

Foil wrapped and skewered potatoes - aluminum nails reduce cooking time

Potatoes baking on the Coleman LXE grill - Note the clay tiles
 
I cook the potatoes for 40-60 minutes, depending upon the grill temperature. I flip once or twice. The clay tiles in the photo will reduce potato charring, but with the olive oil rub it is possible to get a nice crisp skin.  We eat the entire potato when prepared this way.

Add a salad, or coleslaw, grilled broccoli and burgers, bratwurst, hot dogs, grilled chicken, steak or salmon and we have a wonderful summer dinner. 

Original Material: Roadtrek210.blogspot.com

Tuesday, July 20, 2021

Western and Canadian Fires create haze

 

Sunset disappears into smoke and soot - July 19, 8:55pm 

Bookmark and Share

The sunsets over Lake Michigan disappeared in soot and smoke created by fires to the west. 

Fires in Manitoba and Ontario, Canada captured on 11 July 2021, by the VIIRS instrument, aboard the joint NASA/NOAA NOAA-20 satellite:

NASA July 18, 2021 over the Great Lakes

NASA July 19, 2021 over the Great Lakes

The smoke and haze has been noticeable, and the sun became a bright orb at dinner time.  Sunset was at 9:16pm, but the sun faded and had all but disappeared in the western sky by 8:55pm. We were on the eastern shore of Lake Michigan.

Sunset approaching 8:02 pm

8:57 PM - Yes, the evening sun is actually in this photo

Link to NASA:

https://earthdata.nasa.gov/worldview/worldview-image-archive/fires-in-manitoba-and-ontario-canada


Original Material: Roadtrek210.blogspot.com

Friday, July 9, 2021

Vivo Smartphone Flying Camera

 


Smartphone with Flying Camera

Bookmark and Share

Patent issued for flying smartphone camera

Vivo has been given a patent for a small drone tucked inside of a smartphone.  In fact, the small drone has two cameras, one forward facing and the other downward facing. So, who knows? In a few years we all may be taking aerial photos.  This drone is so small that it skirts current FAA rules about registering and publishing aerial drone photos.  However, a drone this small will have difficulty dealing with wind.....

Here's a link to an article:

Vivo Smartphone Drone Patent Articleivo-smartphone-drone-patent-1637685/

Original Material: Roadtrek210.blogspot.com


Tuesday, July 6, 2021

Side Door Electric Lock Issue

 

Using 3M Scotch-Brite Rough Pad to scour electrical contacts (photo after cleaning)


Bookmark and Share

The side door electric lock stopped working with the Chevy fob.  It became intermittent.

This was an easy thing to fix.  There are two, spring loaded contacts on the door and these align with two copper pads on the inside of the door frame.  When the door is closed, these contacts should align and the spring pressure should be sufficient to pass electric current to the door lock solenoid. 

I concluded that wasn't happening.  I inspected the contacts, which were no longer bright brass and the plates were slightly pitted where physical contact is made. I concluded that minor oxidation was creating sufficient electrical resistance to prevent adequate power from reaching the door lock solenoid.

In the old days, I would have used very fine sandpaper to remove the oxidation. 

Scotch-Brite is Superior

I decided instead to use a dry sponge which had "Scotch-Brite"  green scouring pad on one side (trademark of 3M company). I usually have a few of these as well as the blue sponge/pads for dishes.  However, for this chore a rougher pad than the blue was necessary. So I took an old green one and used it dry to buff the contacts.  About 30 seconds of rubbing was sufficient to brighten them up.

For industrial applications, a silver contact would be preferred, but for an automobile brass is the choice of the manufacturer.


Buffing the door contact plates

Buffing the door mounted, spring-loaded contact surfaces


After wiping the contact surfaces with a clean rag, the electric door lock worked as designed.


Original Material: Roadtrek210.blogspot.com (c) 2021